
- Stock: In Stock - Delivery in 1 to 3 days
- Brand: Eurostar
- Model: 150-1T-250
- Weight: 108.00kg
Normal Height Solar Water HeatersEurostar: Innovative solar
water heaters with high efficiency and lifespan. The EUROSTAR solar water
heater is designed and built with the main goal of ensuring high efficiency and
long life.
The new copper selective titanium collector with the highest
degree of efficiency, continuously provides hot water even in the most
difficult weather conditions. The advanced materials used in its construction
and the attention to every detail, ensure its perfect operation for a lifetime.
EUROSTAR solar water heaters are manufactured according to
the international quality assurance standard ISO 9001-2008 and are controlled
by the international standard
ISO / DP9459-2.
The collector is certified with EN 12975-1-2 for its
performance and for its reliability. In addition, the whole system of the solar
water heater is certified according to the European standard EN 12976-1-2.
The EUROSTAR solar water heater and its collectors have been
distinguished separately, as they have been awarded the European quality mark
Solar Keymark.
Boiler Technical Characteristics
1. Outdoor housing made of stainless steel INOX or steel
electrostatic paint (with high temperature lamination) for
unlimited shelf life.
2. Strong insulation of cast ecological polyurethane 5-7 cm.
density 40 kg / m3. (Thermal insulation coefficient 0.019 kcal / m / h / ° C
ensures the consumer to keep hot water even on the coldest nights of winter.
3. The scientifically designed closed circuit sheath ensures
the largest possible heat exchange surface and therefore the fastest heating of
water to a very high temperature.
4. Boiler made of European 3mm steel sheet, for long life
and resistance to pressures. Internal protection from glass (enamel - at
temperatures of 860 ° C) for protection against hard water.
5. Anodic protection with magnesium rod against electrolysis.
6. Electric resistance 4kW, for hot water even on cloudy
days.
7. Double contact safety thermostat, with additional safety
thermostat for protection against overheating.
Advantages
• Simple Installation on Tiles
With its special bases, EUROSTAR is placed on the tiles
without punctures and breaks (even on already finished roofs) in a minimum
time.
• Adjustable Tilt
Its special manifold allows EUROSTAR to change inclination
from (18 ° -22 ° -35º-40 °) depending on operating conditions for even greater
efficiency.
• Also connected to radiators
Collector Technical Characteristics
1. Collector frame from specially designed cast aluminum
profile, treated with electrostatic oven paint, without seams, screws, etc.,
for absolute tightness.
2. Copper hydroskeleton, simple (non selective) or selective
(Titanium-blue) with copper or aluminum sheets that ensure a uniform absorbent
surface and incredibly high performance even in the worst weather conditions.
3. Strong insulation with 40 mm thick (50 kg / m3) rockwool
on the back and 20 mm on the side walls of the collector reduce heat loss to a
minimum, contributing to high efficiency.
4. Low iron securit prismatic crystal, 4mm thick -
unbreakable with high permeability.
5. Special EPDM tires for absolute sealing.
6. A special propylene glycol thermal liquid circulates in
the hydroskeleton of the absorber, achieving rapid heat dissipation and perfect
protection against frost.